본문 바로가기 주메뉴 바로가기
> GWINSTEK 제품 > 디지털미터

GOM-804/805

  • 4 3/4 디지트 DC 밀리옴미터, GOM-804/805
  • 디스플레이 4 3/4 디지트 LCD (50,000 카운트)
  • 기본 정확도 : 0.05%
  • 인터페이스 : RS-232/USB/Handler, GPIB(옵션)
 온라인 견적요청

주요 특징

• 50,000 counts

• 3.5” (320 x 240) TFT LCD display

• High accuracy of 0.05% precision

• 1Amp test current, 1µΩ resolution

• Fast measurement of 60 readings per second

• Four wire resistance measurement

• Temperature compensation measurement function

• Delayed measurement

• 20 sets of panel setting memory

• Dry circuit (GOM-805 only)

• Drive modes: DC+/DC-, Pulsed, PWM, Zero (GOM-805 only)

• Interface: USB device, RS-232C, Handler/Scan/EXT I/O, and GPIB (option)

 

GW Instek launch a new series of D.C. milliohm meter ─ GOM-804/805, which abundantly feature 3.5-inch TFT display, maximum 50,000 counts measurement display, the rapid sampling rate of 60 readings per second, optimum 0.05% measurement precision, four wire measurement method as well as the temperature measurement and temperature compensation measurement function to meet the requirement of low resistance measurement application. The GOM-805 also includesvarious drive modes and Dry circuit for contact resistance measurement applications. More features, including 20 sets of panel setting memory and many external control interface such as RS-232C, USB, Handler/Scan/EXT IO or GPIB (option), greatly elevate GOM-804/805 milliohm meter’s convenience on practical applications.

 

GOM-804/805 adopt 3.5-inch color LCD to enhance the clarity of measurement results and to provide display for related setting criteria that tremendously brings up the completeness of test information. Additionally, GOM-804/805, with the optimum 0.05% precision, augment the measurement speed to 60 sampling rate per second and maintain the display digits of five instead of four despite of different speed selections. Furthermore, the independent functionalitykeys and direction keys together increase the operational convenience which allows users to complete their measurement tasks with intuitive convenience and speed.

 

GOM-805 provides Dry circuit and various drive modes (DC+, DC-, Pulsed, PWM) for measurement applications on different materials. The pulsed current output mode is suitable for interacting conductors of different materials and this output mode is to reduce the thermal EMF influence, which is caused by electric potential difference generated from different conductors acting on different temperatures while conducting low resistance measurements. The DC+and DC- output modes are best for the measurement requirements of inductive components. The PWM output mode, ideal for changing temperature sensitive materials, can avoid resistance value variation which is due to over load happened on current measurement for a long period of time. During the DC+, DC- and Pulsed drive is supplied; the Dry circuit can work with them also. Dry circuit can limit the applied voltage under the open circuit voltage of 20mV to avoid over voltage occurred on the both ends of components.The over voltage will damage the oxide coating and the thin layer of contact surface, as a result, the validity of measurement will then be ruined. For instance, contact resistance of connector measurement is one of the applications.

 

With respect to connecting the external control, GOM-804/805 provide a D-sub 25-pin combined interface to execute, according to the functionalities, Handler, Scan or EXT IO for respectively connecting to a sorting machine; connecting to an external on-off switch, and directly conducting external trigger control. For remote control and measurement result retrieval requirements, GOM-804/805 also provide various interface selections such as RS-232C, USB,and GPIB (GOM-804(option)/GOM-805(standard) interface. Furthermore, the control commands are compatible to that of GOM-802 that saves time in adjusting programs while switching from the old model to the new model.

 

To sum up, GOM-804 evolves from GOM-802 platform with more advanced functionalities and specifications, including display digits, measurement speed and standard interface (RS-232C/USB). With all the capabilities of GOM-804, GOM-805 augments itself with new measurement abilities (Dry circuit and various drive modes) to meet the requirements of broader low resistance measurement applications.

 

Totally replacing the existing models    

In terms of the basic functionalities and specifications, GOM-804/805 can absolutely replace the existing model─GOM-802. All GOM-802 functionalities can be found from GOM-804/805, including resistance measurement range, 1A test current (maximum), four wire measurement method, temperature probe (option, accessory model: PT-100) for temperature measurement and temperature compensation measurement, etc. The programming commands are also compatible to thatof GOM-802. To simply put it, the brand new GOM-804/805 not only provide better display interface, fast measurement (60 readings per second), but also collocate with standard communications interface (RS-232C/USB device) to facilitate users in accomplishing measurement tasks rapidly. On top of that, model switching will not be a problem.

01

 

Faster measurement without sacrificing resolution    

GOM-804/805 has two measurement speed selections, which are Fast reaching 60 readings per second, and Slow 10 readings per second. A major departure from the past, users, in the past, had to juggle between speed and display resolution. GOM-804/805 will not affect resolution despite of any speed selections and will maintain the highest display digits. In other words, reading resolution will not be changed by changing speed and the display digits remainthe same

02

 

Dry circuit test for GOM-805 only    

Dry circuit is to limit test voltage and current to certain levels which will not cause contact points to produce physically or electrically changed circuit and its most frequently used application is contact resistance of connector measurement. Based upon MIL-STD-1344 method 3002-1 low signal level contact resistance, tests must be applied under the maximum open circuit voltage of 20mV (or lower), and short circuit current of 100mA (or lower) to avoidover voltage for the both ends of components. The over voltage will damage the oxide coating and the thin layer of contact surface, as a result, the validity of measurement will then be ruined. GOM-805 provides three levels (500mΩ:100mA/5Ω:10mA/50Ω:1mA) to limit open circuit voltage at 20mV to execute Dry circuit tests.

03

 

Various drive modes for GOM-805 only    

GOM-805 provides various current output drive modes to satisfy diversified and accurate low resistance measurement applications. For instance, for interacting conductors of different materials, the pulsed current output mode can be applied to reduce the thermal EMF influence, which is caused by different conductors acting on different temperatures. The PWM output mode, ideal for changing temperature sensitive materials, can avoid resistance value variationwhich is due to over load on large current measurement in a long period of time. The DC+ and DC- output modes are best for the measurement requirements of inductive components.

04

 

Standard interface for control and communications    

With respect to connecting the external control, GOM-804/805 provide a D-sub 25-pin composite interface to execute, according to the functionalities, Handler, Scan or EXT IO for connecting to a sorting machine; connecting to an external on-off switch, and directly conducting external trigger control respectively. For remote control and measurement result retrieval requirements, GOM-804/805 also provide various interface selections such as RS-232C, USB,and GPIB (GOM-804(option)/GOM-805(standard) interface.

05

 

Command compatiability    

The commands of GOM-804/805 are compatible to that of GOM-802 that allows users to switch equipment with simple settings. There is no cost in adjusting existing programs and production delay will not be happening while switching from the old model to the new model.

제품 사양

GOM-804

GOM-805

디스플레이

50,000 카운트

샘플링 속도

10 readings/s

Slow 모드

60 readings/s

Fast 모드

저항 측정

범위/테스트 전류 (고정)

5mΩ/1A

50mΩ/1A

500mΩ/100mA

5Ω/100mA

50Ω/10mA

500Ω/1mA

5kΩ/100uA

50kΩ/100uA

500kΩ/10uA

5MΩ/1uA

정확도

±(0.1% rds + 0.02% range)

5mΩ~50mΩ

±(0.05% rds + 0.02% range)

500mΩ~50Ω

±(0.05% rds + 0.008% range)

500Ω~500kΩ

±(0.2% rds + 0.008% range)

5MΩ

분해능

0.1uΩ, 1uΩ, 10uΩ, 100uΩ, 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω,100Ω

온도

범위

-50˚C~399.9˚C

정확도

0.3%±0.5˚C

-10˚C~40˚C

0.3%±1.0˚C

그 외

분해능

0.1˚C

Dry 회로

-

개방 회로 20mV 미만;

500mΩ, 5Ω, 50Ω 범위만

Drive 모드

Dc+/DC-

-

지원

Pulsed

-

지원

PWM

-

지원

Zero

-

지원

지원 기능

COMP 기능, REL 기능, 다이오드 측정, 온도 보정, 온도전환, 온도 측정

COMP 기능, REL 기능, 다이오드 측정, 온도 보정, 온도전환, 온도 측정, Dry 회로, Drive 모드, Binning 기능

일반 사양

인터페이스

USB(Device)

USB(Device)

RS-232

RS-232

Handler/SCAN/EXT IO

Handler/SCAN/EXTIO

GPIB (옵션)

GPIB

디스플레이

3.5” TFT LCD 디스플레이 (해상도 320x 24)

메모리 

패널 설정 20 세트

AC 입력 전원

AC 100~240V, 50/60Hz

소모 전력

최대 25VA

치수 및 무게

223(W) x 102(H) x 283(D) mm, 약4kg

기본 액세서리

퀵 스타트 가이드 x 1, 전원 코드 x 1, 테스트 리드 GTL-308 x 1, 사용 설명서 x 1

옵션

옵션.01

GPIB 카드(GOM-804 전용)

* 위 옵션은 공장 출하 전에 설치되어야 합니다.

옵션 액세서리

PT-100

온도 프로브

GTL-232

RS-232 케이블, 9핀(암)-9핀, 널 모뎀

GTL-248

GPIB 케이블, 2000mm

GTL-251

GPIB-USB-HS (High Speed)

주문 정보

GOM-805

50000 카운트 DC 밀리옴미터(Handler/RS-232/USB Device/GPIB)

견적요청

GOM-804

50000 카운트 DC 밀리옴미터(Handler/RS-232/USB Device)

견적요청

옵션

옵션.01

GPIB 카드(GOM-804 전용)

견적요청

* 위 옵션은 공장 출하 전에 설치되어야 합니다.

옵션 액세서리

PT-100

온도 프로브

151,000원

GTL-232

RS-232 케이블, 9핀(암)-9핀, 널 모뎀

11,000원

GTL-248

GPIB 케이블, 2000mm

195,000원

GTL-251

GPIB-USB-HS (High Speed)

1,829,000원

 

상기 가격은 부가세 별도 가격입니다.